This product can be used as a standalone product or in conjunction with either Nerta Carnet Jumbo or Active Diamond in a two step process. We recommend that after the Anti-Insect has been applied, foam over with either Carnet Jumbo or Active Diamond and leave to dwell for a further 1 minute.
Using preferably a 40 degree nozzle, start cleaning from the bottom to the top covering all areas (always clean into fresh soap using the high pressure water as a water broom.
Rinsing – rinse any excess soap from the top to the bottom.
This product is safe on all paints and chrome but care should be taken when using it on mirror polished, untreated aluminium as the product could leave a white veil or stain. Due to the nature of aluminium, we would recommend to test all products on a small inconspicuous area before use.
Also avoid letting the product dry on the vehicle. Should this happen, re-foam to reactivate the soap and wash off as per the above instructions.
This product can also be applied via a hand sprayer. It can be mixed between 10:1 and 3:1 depending on contamination, using higher mix ratios on aluminium.
All Nerta soaps are applied through a high pressure foam lance.
Mixing Ratio – 100% in a 1 litre foaming bottle (the high pressure foamer will mix the Anti Insect at a ratio of around 10:1 depending on the foamer.
Setting 4 on a Suttner foamer.
Cleaning – foam from the bottom to the top covering all areas affected by insects. Allow to dwell for around 1 minute.
Using preferably a 25 degree nozzle, we recommend that after the Anti-Insect has been applied on a dry vehicle, foam over with either Carnet Jumbo or Active Diamond and leave to dwell for a further 1 minute.
This product is safe on all paints and chrome.
DO NOT USE ON MIRROR POLISHED ALUMINIUM. IT IS RECOMMENDED TESTING PRODUCT ON A SMALL INCONSPICUOUS AREA BEFORE USE.