Mixing Ratio – 4:1 as a general rule or in a 1 litre foaming bottle 200ml Active Diamond and 800 ml water.

Setting 1 on a Suttner foamer.

This can be adjusted however, dependant on the amount of contamination. For example, on badly soiled stock crates the ratio can be increased to 50% Active Diamond to 50% water.

Cleaning – foam from the bottom to the top. Allow to dwell for around 1 minute.

Using preferably a 40 degree nozzle start cleaning from the bottom to the top covering all areas (always clean into fresh soap using the high pressure water as a water broom)

Rinsing – rinse any excess soap from the top to the bottom.

This product is safe on all paints and chrome but care should be taken when using it on mirror polished /untreated aluminium, as the product could leave a white veil on the surface.

Due to the nature of aluminium we would recommend to test all products on a small inconspicuous area before use.

Also, avoid letting the product dry on the vehicle, should this happen, please re-foam to reactivate the soap and wash off as per the above instructions.

This product can also be used to manually clean with a sponge and broom. Mix at 100:1