All Chiefs Australia soaps are applied through a high pressure foam lance.
Mixing Ratio:
Application through a can be applied through a Suttner ST73 foamer at the following settings:
• Light degreasing – Setting 3
• Heavy duty degreasing – Setting 5
This product can also be used through Suttner Downstream injectors, ST160 / ST164 or the Chiefs InjectaChem using the following chemical restrictors.
• Light degreasing – restrictor 1.1
• Heavy duty degreasing – restrictor 2
Cleaning – foam from the bottom to the top. Allow to dwell for around 1 minute.
Using preferably a 25 degree nozzle start cleaning from the bottom to the top covering all areas (always clean into fresh soap using the high pressure water as a water broom)
Rinsing – rinse any excess soap from the top to the bottom.
For further product information please see our Mixing Instructions in the “Product Resources” Tab.
DO NOT USE ON MIRROR POLISHED ALUMINIUM. IT IS RECOMMENDED TESTING PRODUCT ON A SMALL INCONSPICUOUS AREA BEFORE USE.