ST-75 Foam Head with 1.6mm Nozzle (Stainless-steel)

ST-75 Foam Head with 1.6mm nozzle in stainless-steel

The ST-75 is used with a downstream injector from the ST-160/164/167 range to produce a dense foam.

Use the specifications of the pressure cleaner to determine the nozzle sizing required. *See the chart below.

Technical Details

Stainless Steel
Nozzle: No. 75 = 1.6mm
Inlet: 1/4″ F
Max Press: 350 Bar
Max Temp: 100°C