All Chiefs Australia soaps are applied through a high pressure foam lance and need to be applied between 80 and 100:1 water to soap.
Mixing Ratio – 4:1 as a general rule or in a 1 litre foaming bottle. 200ml Platinum Wash and 800 ml water.
Setting 1 on a Suttner foam lance with no dilution. This can be adjusted however, dependant on the amount of contamination.
Cleaning – foam from the bottom to the top. Allow to dwell for around 1 minute.
Using preferably a 25 degree nozzle, start cleaning from the bottom to the top covering all areas (always clean into fresh soap using the high pressure water as a water broom)
Rinsing – rinse any excess soap from the top to the bottom.
For further product information please see our Mixing Instructions in the “Product Resources” Tab.
IT IS RECOMMENDED TESTING PRODUCT ON A SMALL INCONSPICUOUS AREA BEFORE USE.